Bitrue

Seychelles

CoinGecko Trust 8/10·#35 rank·9.9K BTC vol 24h·Seychelles·Est. 2018

连接 Bitrue

登录以连接您的交易所并自动追踪您的投资组合

Bitrue at a Glance

Key facts about Bitrue compiled from verified market data and CoinGecko's exchange registry. These metrics help you evaluate liquidity, regulatory footprint and operational maturity before connecting a portfolio.

信任评分: 8/10; Rank #35
24h Volume (normalized): 9.9K BTC
Active markets: 100 pairs
Available in: 1 jurisdictions; Seychelles
Operating since: 2018; 8 years
Trading incentives: Not offered
CCXT integration: Supported; bitrue
Data source: CoinGecko exchange registry

交易访问与集成

Bitrue is wired into Mantapex through the CCXT integration layer, so importing balances and trade history into a read-only portfolio requires an API key and a secret that you generate inside your own Bitrue account. Because Mantapex never custodies your funds, the keys you create should be scoped to read access only — withdrawal, transfer and trading permissions are unnecessary for portfolio tracking and should remain disabled. The trust score and rank shown in the Quick Facts above are sourced from CoinGecko's exchange framework, which blends reported liquidity, web traffic patterns, regulatory posture and API health into a single signal — useful when comparing Bitrue to peer venues, but never a substitute for your own due diligence. The headquarters jurisdiction shown above determines the regulatory framework, KYC tier and product mix Bitrue can offer a given user, and that scope can change as licensing evolves. Verify eligibility and the local terms of service on the official site before opening an account. The operating history reflected above means there is a comparatively deep public trail of incidents, audits, fee schedules and product launches you can review when sizing Bitrue against newer venues.

兼容 CCXT 需要 API 密钥需要 API 密钥串提供设置指南

Connection metadata is read directly from Mantapex's CCXT integration manifest — credential requirements reflect what Bitrue itself exposes to read-only API consumers and may evolve as the venue updates its API.

Getting Started with Bitrue

1. Log into your Bitrue account, and click [API Management] from the user center icon.
2. Enter a label/name for your API key and click [Create API].

LEARN MORE

Required Credentials: API 密钥私密密钥

Bitrue 的账户、托管与安全

Bitrue operates as a custodial trading venue: when you fund an account, the deposited assets are held in wallets controlled by the exchange and credited to your balance as a book-entry until you withdraw them. That trade-off — convenience and order-book liquidity in exchange for counterparty risk — is the central design choice of every centralised exchange and is what makes platform-level security so important to evaluate. Bitrue has been running its custody and matching infrastructure since 2018, which gives it 8 years of operational track record for users to review when judging incident history, fund-recovery policy and any insurance or reserve-fund coverage.

Almost every major centralised exchange — including Bitrue — operates under some form of KYC ("Know Your Customer") and AML ("Anti-Money-Laundering") obligations imposed by the jurisdiction it serves. Bitrue is reported with its operating entity in Seychelles, so its baseline KYC programme follows that jurisdiction's rules — additional verification may still be requested for higher-tier withdrawal or fiat-on-ramp limits, and access to specific products can be restricted depending on where the user resides. Expect to provide a government-issued ID document and a recent proof-of-address at minimum; higher verification tiers may add liveness checks, source-of-funds questionnaires and accredited-investor confirmations.

For the specific case of connecting Bitrue to Mantapex, the additional hardening layer is straightforward: generate a dedicated API key for read-only portfolio sync, label it clearly (for example "Mantapex read-only sync"), disable every permission except the minimum the exchange exposes for balance and trade-history queries, and store the secret in a password manager so you can rotate it on a schedule. If Bitrue supports IP whitelisting and you connect from a stable address, restrict the key to that address. If you ever stop using Mantapex — or any other third-party dashboard — revoke the key on the exchange side rather than just deleting it from the dashboard, because the credential continues to authenticate against Bitrue's API until Bitrue itself invalidates it.

如何安全地连接任何交易所

Enable two-factor authentication on the exchange account itself before generating any API keys. The strongest options are hardware security keys (FIDO2 / WebAuthn devices such as YubiKey or Solo) where supported, followed by an authenticator app on a dedicated device (Aegis, Raivo, 1Password, or Google Authenticator); SMS-based 2FA is the weakest common method because of SIM-swap risk. Keep the recovery phrase or backup codes in offline cold storage rather than the same password manager you sign in with. Where the venue offers a withdrawal-address whitelist, turn it on: it shrinks the blast radius of a stolen key or hijacked session because funds can only leave to a pre-approved address after a cool-down. Pair that with anti-phishing codes, a dedicated email account, and alerts for new logins, withdrawal requests and API-key creation — most exchange-related losses originate from compromised individual accounts, not platform-wide breaches.

Security guidance on this page is generic exchange hardening that applies to every centralised crypto venue. For Bitrue's exchange-specific policies — fund-segregation model, proof-of-reserves cadence, insurance coverage and incident-response history — the canonical references are Bitrue's own Help Centre and any audit reports or attestations the venue publishes directly.

Bitrue 的 API 访问详情

Connecting Bitrue as a read-only portfolio source on Mantapex relies on the credentials defined by Bitrue's own API. The matrix below mirrors exactly what the CCXT integration layer asks for — ticked rows mean the field is required to authenticate, untouched rows mean Bitrue doesn't ask for that field at all.

API 密钥

Public identifier that pairs your read-only access with your exchange account.

API 密钥串

Private signing string used to authenticate each request — never share it.

API 口令

Additional passphrase set when the key is created (KuCoin, OKX-style models).

账户 UID

Numeric account identifier that some venues require alongside the API key.

子账户 ID

Used when the venue scopes API access to a specific sub-account.

登录名

A separate username distinct from email, used by a small number of CCXT-supported venues.

TOTP / 2FA 密钥

Time-based one-time-password seed for endpoints that demand a fresh 2FA code.

钱包私钥

Self-custody signing key — required only by DEX / on-chain integrations.

钱包地址

On-chain address tied to the private key for DEX-style integrations.

Bearer 令牌

OAuth-style bearer token, occasionally used in place of an HMAC API key pair.

In short, Bitrue requires 2 credentials to authenticate API requests: API 密钥 and API 密钥串. All of these are generated from inside the exchange's own dashboard — Mantapex never asks you to share your account password or to set up an API key with withdrawal permissions enabled.

When you create the key on Bitrue for use with Mantapex, restrict its permissions to read-only access (sometimes labelled "view", "read", "query" or "info"). Mantapex only needs to fetch balances, trade history and open positions. Withdrawal, trade-execution and transfer scopes should remain disabled. If Bitrue offers a granular permission model, the safest combination is: enable "Read" or "View", disable "Trade" or "Spot trade", disable "Withdraw" or "Universal Transfer", and leave any margin / futures permission switched off unless you specifically want those positions visible inside your portfolio dashboard.

Some exchanges — Binance, OKX, Bybit, Bitget, KuCoin and several Asia-Pacific venues — offer an optional IP whitelist when you create the API key. Leaving the whitelist empty lets the key authenticate from any address, which is the simplest setup for use with a cloud-hosted dashboard such as Mantapex. If Bitrue forces you to enter at least one IP and you don't have a static address, you can usually use a placeholder value the exchange recognises (for example "0.0.0.0/0" or the wildcard option) — consult Bitrue's API documentation before relying on that workaround. Either way, the credentials remain in a read-only scope and cannot be used to move funds off the venue.

Credential schema sourced directly from the CCXT integration manifest used by Mantapex. Bitrue may rotate or extend its API in the future — if the exchange asks for a credential not listed here when you create the key, you can safely ignore it for the purpose of a read-only Mantapex import.

Bitrue 的官方资源与社区

The links below point to first-party Bitrue properties. We track them so you can verify announcements, support channels and operator-published policies directly at the source rather than from third-party copies. External destinations open in a new tab and are marked nofollow per our resource-link policy.